Mühlen

567 KB

Autogenous/Semi-Autogenous Mills eng.

Autogenous (AG) grinding is the size reduction of material in a tumbling mill utilizing the feed material itself as grinding media. Semi-Autogenous (SAG) grinding is the size reduction of material in a grinding mill, utilizing the feed plus supplementary grinding media. The most common supplementary medium is steel balls.

250 KB

Conical Ball Mill eng.

The Conical Mill is most efficient when the maximum feed size is less than 2" and iron contamination is not a factor. These mills are sized from 2 HP to 450 HP for

989 KB

Gearless Autogenous/ Semi-Autogenous Mills eng.

Autogenous (AG) grinding is the size reduction of material in a tumbling mill utilizing the feed material itself as grinding media. Semi-Autogenous (SAG) grinding is the size reduction of material in a tumbling mill utilizing the feed material plus supplemental grinding media. The most common supplementary medium is steel balls.

741 KB

ROD MIll eng.

Metso Rod Mills are built in sizes from 3’ to 14’ shell diameter with shell lengths 1 1/2 to 2 1/2 times the diameter, depending on upon the mill diameter and the application.

179 KB

Metso Minerals Aftermarket Services Roller Mill Improvements eng.

The existing oil bath lubricating method provides no filtering and the high oil temperature reduces the oil viscosity. Contaminated low viscosity oil reduces life of the roller bearings. The Recirculating Lubrication System filters the oil to proper cleanliness level and cools the oil to maintain adequate viscosity. The benefit is increased life on your roller bearings. The system consists of a set of supply and return pumps for each roller and an oil conditioning circuit.

680 KB

Solid Rubber Roller Mill eng.

Metso draws from more than 100 years of mill design and manufacturing expertise and more than three decades of successful Solid Rubber Roller (SRR) Mill applications. Installation time is fast and simple. This mill is assembled and mounted on a steel frame in our factory before shipment. The SRR mill is mounted to any floor with the necessary load-bearing capacity. The costs for foundations, foundation design, and mill installation costs must be taken into consideration when comparing the SRR with a trunnion bearing type mill. When comparing these two type mills, the SRR Mill will provide the lowest total installed cost.

742 KB

Stirred Media Detritor eng.

Within the metalliferous mining industry, economic pressures dictate the need to treat previous “untreatable” ores. These include polymetallic ores with the intergrowth of mineral values, ultra fine grained disseminated ores and refractory ores. Ultra fine grinding can enable liberation of values or maximize surface area to achieve required leach kinetics. Metso Minerals characterizes ultra fine grinding as 80% passing 15 microns or finer.

742 KB

Stirred Mills eng.

VERTIMILL® & Stirred Media Detritor Vertimills are globally recognized as energy efficient grinding machines and have been proven to grind more efficiently than ball mills with feeds as coarse as 6 mm to products finer than 20 microns. In addition to grind efficiency, reduced media consumption, lower installation cost, minimal maintenance, and minimal liner wear make the Metso Vertimill the lowest total cost of ownership in any applications, substantially improving the profitability of concentrators.